Getting Started with Your Tone Protector Reed Safe - BagpipeLessons.com
Product helpTone Protector Reed SafeJori Chisholm, BagpipeLessons.com. Updated November 2026

Getting Started with Your Tone Protector Reed Safe

Thank you for getting a Tone Protector Reed Safe, the split chanter stock and digital chanter cap with two-way humidity control. Here’s everything you need to set it up, use it every day and keep it working well.

Quick start: 5 steps

  1. Take off the digital display cap (the hygrometer and thermometer).
  2. Take the two humidity packets out of the bag and put them both into the Tone Protector cap. It’s perfectly fine if the packets get crumpled; both will fit.
  3. Put the display cap back on to seal the top.
  4. Place the Tone Protector cap over the protective reed cover, then fit your chanter into the reed cover. Add or remove hemp to get a good fit.
  5. Replace your current chanter stock with the split chanter stock. If you’d like help with this, contact us.

That’s it. Your Reed Safe is working. The humidity settles right away, but it can take a few days for your reed to fully settle, depending on your reed and the humidity where you live. Download the printed instructions (PDF).

At a glance

In the boxSplit chanter stock, reed cover with ferrule (imitation ivory or polished nickel), Tone Protector digital cap (black or blue), two 84% humidity packets, instructions
The right reading84%
Replace the packetsWhen it reads below 80% for a few days
Packets lastDepends on where you live and how often you play. In a drier place they get used up faster
NeverAdd water, or lick, pinch or wet your reed

Using it every day

How it protects your reed

The split stock lets you move your chanter between your pipe bag and the Tone Protector quickly, and your reed stays covered, so it’s never exposed to knocks or dry air.

Before you play

You can blow some warm air through the reed first, but don’t lick, pinch, wet or otherwise handle the reed. The only moisture getting to the reed should be from your breath while you play, or from the Tone Protector while it’s stored.

After you play

Put your chanter straight back under the Tone Protector. Once your reed has settled, don’t leave it out in the air for more than a few minutes.

Breaking in a new reed

Put the new reed in your chanter, cover it with the Reed Safe and leave it overnight to settle. It makes breaking in a new reed much quicker.

Top tips

Use 84% packets

The Reed Safe uses the same 84% packets as the Tone Protector Chanter Cap. (The Tone Protector Reed Case uses 75% packets.)

Great for pipe bands

Swapping chanters between players is quick and safe, because the reed stays covered the whole time.

Check the display

Glance at the reading now and then to make sure everything is working. Some small changes are normal.

Never add water

Don’t add water to the Tone Protector or the packets. When packets dry out, replace them with fresh ones. The packets are 100% non-toxic and food safe.

Readings and packets

84%Tone Protector Reed Safe
75%Tone Protector Reed Case

Reading low

If it reads below 80% for a few days, it’s time for new packets. Get replacement packets.

Reading high

Take the battery out of the display and put it back in, which resets it. If it still reads well above 84%, check whether your reed is getting very wet.

How long packets last

It depends on the humidity where you live and how often you play. In a drier climate the packets get used up faster.

Still not right?

If you’ve replaced the packets and reset the display and the reading still isn’t right, contact us and we’ll help.

Battery and display

If the display isn’t working

Take the battery out of the display cap. The small metal prongs that hold the battery can work loose, so bend them in very slightly for better contact, then put the battery back. If it still doesn’t work, try a new battery.

Switching between °C and °F

Take the display cap off. On the back, press the small rubber button marked “°C/°F”.

For pipe bandsGet Tone Protectors for your whole band

Band pricing: 15% off orders of 10 or more. The discount is applied automatically at checkout.

Shop the Reed Safe

Your questions, answered

How does the Tone Protector work?

It keeps the moisture in your reed at a steady, precise level. Moisture affects everything about how your reed plays: pitch, volume, stability, tone and how hard it is to blow. Store the reed at the right humidity and all of that becomes steady and reliable.

How is the Reed Safe different from the Chanter Cap?

The Reed Safe adds a split chanter stock and a protective reed cover, so you can move your chanter between your bag and the Tone Protector without ever exposing the reed. The humidity control is the same.

How quickly will I notice a difference?

Right away. As soon as your reed is under the Tone Protector, it starts to settle. Depending on where you live, it reaches a steady moisture level within a few hours to a day.

How does it help me tune faster?

When you play, your reed takes on moisture from your warm breath, and the sound and pitch change as it does. A reed stored close to the moisture level of your breath settles much faster, so you warm up quicker, tune once, and your tuning holds.

Why do reeds last longer with the Tone Protector?

Without it, a reed swells when you play and shrinks when it dries out completely, over and over, which can warp or crack it. Licking and pinching the reed shortens its life too. Kept at a steady humidity, a good reed lasts.

How does the two-way humidity control work?

Each packet is pre-set to a specific humidity level, accurate to plus or minus 1%. If the reed is too dry the packet adds moisture, and if it’s too wet the packet absorbs it. The packets hold a solution of pure water and natural salts inside a membrane that lets water vapor through, and they’re 100% non-toxic and food safe.

Does it work in any climate?

Yes. Your reed stays at the same humidity whatever the weather, season or place, including the very dry air on airplanes.

Videos to watch

Need help? Contact us or email [email protected], and we’ll get back to you.

Jori Chisholm, inventor of the Tone Protector
Inventor of the Tone ProtectorJori Chisholm

I invented the Tone Protector to solve a problem every piper has: keeping a good reed sounding its best, every day. I founded BagpipeLessons.com in 1999 and have taught the bagpipes full time ever since. I’m also the inventor of the InTune Mic and the Bagpipe Gauge.

More about Jori →